Pressure Reducing Valve – Model 720: The Model 720 Pressure-Reducing Valve is a hydraulically-operated, diaphragm-actuated, control valve that reduces higher upstream pressure to lower constant downstream pressure regardless of fluctuating demand or varying upstream pressure.
Pressure Reducing Valve – Model 720-20: The Model 720-20 Pressure-Reducing Valve with Check Feature is a hydraulically-operated, diaphragm-actuated, control valve that reduces higher upstream pressure to lower constant downstream pressure regardless of fluctuating demand or varying upstream pressure. The check feature prevents reverse flow through the valve.
Pressure Reducing Valve – Model 720-55: The Model 720-55 Pressure-Reducing Valve with Solenoid Control is a hydraulically-operated, diaphragm actuated, control valve that reduces higher upstream pressure to lower constant downstream pressure regardless of fluctuating demand or varying upstream pressure. The valve opens and shuts-off in response to an electric signal.
Pressure Reducing Valve – Model 720-PD: The Model 720-PD Proportional Pressure-Reducing Valve is a hydraulically-operated, diaphragm-actuated, control valve that reduces higher upstream pressure to lower downstream pressure at a fixed ratio.
Pressure Reducing Valve – Model 730-55: The Model 730-55 Pressure-Relief/Sustaining Valve with Solenoid Control is a hydraulically-operated, diaphragm-actuated, control valve that sustains minimum pre-set, upstream (back-) pressure regardless of fluctuating flow or varying downstream pressure. It also either opens or closes in response to an electric signal. When installed as a circulation valve, the Model 730-55 relieves excessive line pressure when above maximum pre-set.
Pressure Sustaining Valve – Model 723: The Model 723 Pressure-Sustaining and -Reducing Valve is a hydraulically-operated, diaphragm-actuated, control valve with two independent functions. It sustains minimum pre-set upstream pressure regardless of fluctuating flow or varying downstream pressure, and it prevents downstream pressure from rising above maximum pre-set regardless of fluctuating flow or excessive upstream pressure.
Pressure Sustaining Valve – Model 736: The Model 736 Differential-Pressure Sustaining Valve is a hydraulically-operated, diaphragm-actuated, control valve that sustains minimum pre-set, differential pressure between two points regardless of fluctuating flow or varying upstream pressure.
Pressure Relief Valve – Model 73Q: The Model 73Q Quick Pressure-Relief Valve is hydraulically-operated, diaphragm-actuated, control valve that relieves excessive system pressure when this pressure rises above the pre-set value. It immediately, accurately, and with high repeatability responds to system pressure rise by fully opening. The Model 73Q provides smooth drip-tight closing.
Flow Control Valve – Model 770-U: The Model 770-U Flow Control Valve is a hydraulically operated, diaphragm-actuated, control valve that maintains pre-set maximum flow, regardless of fluctuating demand or varying system pressure.
Flow Control Valve – Model 770-55-U: The Model 770-55-U Flow Control Valve with Solenoid Control is a hydraulically-operated, diaphragm-actuated, control valve that maintains preset maximum flow, regardless of fluctuating demand or varying system pressure. The valve opens and shuts-off in response to an electric signal.
Level Control Valve – Model 750-66-B: The Model 750-66-B Level Control Valve with Bi-Level Vertical Float is a hydraulically-controlled, diaphragm actuated, double-chambered control valve. The valve is hydraulically powered to fully open at pre-set reservoir low-level, and to shut-off at pre-set high level regardless of valve differential pressure.
Level Control Valve – Model 750-67: The Model 750-67 Level Control Valve with Modulating Vertical Float is a hydraulically-controlled, diaphragm actuated, control valve that controls reservoir filling to maintain constant water level, regardless of fluctuating demand. The modified Model 75A-67, installed at reservoir outlet, sustains minimum reservoir level.
Level Control Valve – Model 750-60: The Model 750-60 Level Control Valve with Modulating Horizontal Float is a hydraulically-controlled, diaphragm actuated, control valve that controls reservoir filling to maintain constant water level, regardless of fluctuating demand.
Level Control Valve – Model 750-65 The Model 750-65 Level Control Valve with Bi-Level Electric Float is a hydraulically-operated, diaphragm actuated, control valve that controls reservoir filling in response to an electric float switch signal, opening at pre-set low-level and shutting-off at pre-set high level. The double-chamber actuated Model 750-65-B is powered to fully open and close even at very low pressure.
Pressure Reducing Valve – Model 753-66: The Model 753-66 Level Control and Pressure-Sustaining Valve with Bi-Level Vertical Float is a hydraulically-operated, diaphragm-actuated, control valve that controls reservoir filling, opening at pre-set reservoir low-level and shutting-off at pre-set high level. During filling, it sustains minimum upstream pressure regardless of fluctuating flow or reservoir level.
Pump Control Valve – Model 740: The Model 740 Booster-Pump Control Valve is a hydraulically-operated, diaphragm-actuated, active check valve that opens fully or shuts off in response to electric signals. It isolates the pump from the system during pump starting and stopping, to prevent pipeline surges.
Pump Control Valve – Model 743: The Model 743 Booster-Pump Control & Pressure-Sustaining Valve is a hydraulically-operated, diaphragm actuated, active check valve that opens or shuts-off in response to electric signals. It isolates the pump from the system during pump starting and stopping, to prevent pipeline surges. While open, it sustains minimum discharge pressure regardless of fluctuating flow.
Pump Control Valve – Model 748: The Model 748 Pump Circulation and Pressure-Sustaining Control Valve adds the advanced “active check valve” logic to standard pump systems. It is a hydraulically-operated, diaphragm-actuated, control valve that in response to electric signals (during the pump starting and stopping processes) opens, while sustaining discharge pressure, or shuts-off. By progressively circulating pump flow, it enables a standard mechanical check valve to respond gradually during the pump starting and stopping processes, preventing pipe-line surges.
Surge Control Valve – Model 735-M: The Model 735-M Surge-Anticipating Valve is an off-line, hydraulically-operated, diaphragm-actuated valve. The valve, sensing line pressure, opens in response to the pressure drop associated with abrupt pump stoppage. The pre-opened valve dissipates the returning high pressure wave, eliminating the surge. The Model 735-M smoothly closes drip-tight as quickly as the relief feature allows, while preventing closing surge.
The valve also relieves excessive system pressure.
Surge Control Valve – Model 735-55-M: The Model 735-55-M Surge-Anticipating Valve with Solenoid Control is an off-line, hydraulically-operated, diaphragm actuated valve. The valve immediately opens in direct response to any power failure even prior to the pressure drop associated with abrupt pump stoppage. The pre-opened valve dissipates the returning high pressure wave, eliminating the surge. The Model 735-55-M, sensing line pressure, smoothly closes drip-tight as quickly as the relief feature allows, while preventing closing surge. The valve also relieves excessive system pressure.
Series 9000 High Pressure Control Pinch Valve: The Series 9000 high-pressure control pinch valve is Red Valve's ANSI Class 300# control valve product. The heavy-duty elastomer sleeves are reinforced with high strength nylon, polyester fabrics, or Kevlar material. Several heavy-duty sleeve designs are available - standard full port for on/off isolation applications; double wall for severe abrasive applications; cone, reduced port, and variable orifice designs for control applications. The elastomer sleeve will close even on solids, and the flexing action of the sleeve eliminates the possibility of scaling. Combining these features with a sealed body design and no packing to maintain, results in a simple, rugged, no-hang-up, maintenance-free valve.
Solenoid Control Valve – Model 710: The Model 710 Solenoid-Controlled Valve is a hydraulically-operated, diaphragm-actuated, control valve that either opens fully or shuts-off in response to electric signals. For very low-pressure applications, refer to the Full-powered Opening & Closing Model 710-B.
Series 5400 Pinch Control Valve: Red Valve’s redesigned Series 5400 Control Pinch Valve features centerline valve closure, true feedback positioning, compact size, enclosed mechanical parts, and accurate, repeatable variable venturi flow control. Centerline closure is extremely important for larger size pinch on extremely abrasive and high velocity applications. Centerline closure outlasts all other types of gate, plug, or ball valves on control of abrasive and corrosive slurries. The resilient elastomer sleeve outlasts even stellite coated control valves.
< B>Solenoid Control Valve – Model 710-B: The Model 710-B Powered-Opening Solenoid-Controlled Valve is a double-chambered, hydraulically operated, diaphragm-actuated, control valve that either opens fully, regardless of valve differential pressure, or shuts-off in response to electric signals.
B>Electronic-Control Valve – Model 718-03: The Model 718-03 Electronic-Control Valve combines the advantages of an excellent modulating, line-pressure driven, hydraulic control valve with the advantages of electronic control. This valve responds to signals from the electronic controller BERMAD BE (optional) according to the set values programmed into the controller. For very low pressure applications, refer to the full-powered opening & closing – 718-03-B
Burst Control Valve – Model 790-M: The Model 790-M Burst Control Valve is a hydraulically operated, diaphragm-actuated, control valve that upon sensing flow in excess of setting shuts-off and locks drip-tight, until it is manually reset. As long as flow is lower than the setting, the valve remains fully open, minimizing head-loss.
Hydrometer – Model 900: The 900 Series Hydrometer is based on a patented innovation that combines a water meter control-head and a hydraulic control valve into a single unit. This innovative solution has proven that it enhances labor and installation cost reductions and efficiency in a variety of irrigation applications.
Series 5800E - Electric Actuated Control Pinch Valve: The Series 5800E Electrically Actuated Control Pinch Valve is reliable, maintenance-free and cost effective. Replacing a plug valve, gate valve or ball valve is easy with a 5800E because of it has the same face-to-face dimensions. There are no seats to grind, no stuffing box to repack, and no packing gland to adjust ever. The rugged, self-cleaning elastomer sleeve isolates all mechanical pars of the mechanism, so the break away torque remains constant.
Series 5300 Pinch Control Valve: Red Valve Company has developed a new open frame control pinch valve, the Series 5300. The Series 5300 valve features many of the same advantages of the Series 5200 line of control pinch valves, in a light-weight, low-cost open frame design. The open frame design is possible because the sleeve is the only wetted part of the pinch valve, protecting the operating mechanism and frame from corrosive or abrasive attack from the line process. A heavy-duty, rugged pinch mechanism pinches the sleeve, resulting in accurate flow control. The Series 5300 has no packing to maintain or seats to wear, and is well suited for handling corrosives, powders, and slurries.
Series 5200 Pneumatic Control Pinch Valve: The Red Valve Series 5200 Control Valve design offers maximum durability with precise control and virtually eliminates maintenance. The Series 5200 valve is designed in sizes 1” to 4”. A heavy duty, rugged pinch mechanism positions the sleeve, resulting in accurate flow control. The valve has no packing to maintain or seats to wear, and the need for expensive body alloys is eliminated.
Series 5200 Diaphram Actuated Control Pinch Valve: In smaller sizes, the Series 5200 is available with a diaphragm actuator. The quick-response and low-hysteresis of a diaphragm actuator allows the 5200 to react quickly to input signals. This gives the 5200 Diaphragm great accuracy and repeatability on small-diameter slurry lines.
Series 5200E Control Pinch Valve: The Series 5200E electrically actuated control valve is a reliable, maintenance-free, cost-effective valve, designed for tough slurry and abrasive applications. There are no seats to grind, no stuffing boxes to repack, and no packing glands to adjust, ever. The rugged, self-cleaning elastomer sleeve isolates all mechanical parts of the valve, so the breakaway torque remains constant.
Series 5200D Control Pinch Valve: Red Valve's Series 5200 D-Port control valve design results in an economical control valve choice. When fully open, the D-Port has 95% of the flow of a full-ported valve. Flow control begins immediately, providing a linear flow characteristic. The D-Port configuration employs a single actuator which closes from the top. This design shortens the actuator stroke, which in turn reduces operating costs. An external stroke adjustment is provided. The rugged elastomer sleeve is self-cleaning, with no packing to maintain, and provides accurate, repeatable control. The Series 5200 D-Port control valve can be furnished with a standard, double wall, or cone or sleeve design.
Series RSR Pressure Relief Pinch Control Valve: The Red Valve Series RSR Pressure Relief Valve is designed specifically for slurry applications. It is a reliable relief valve available for slurry service, venting surge pressures in the system, or to maintain system pressure. The valve operates very simply – making use of a spring loaded cylinder, which keeps a rugged reinforced rubber pinch valve sleeve pinched closed. As process pressure builds up and exceeds the tension set by the spring, the valve opens. The greater the pressure build–up, the more the valve opens. Since the sleeve isolates the process from the pinch mechanism, corrosion, bridging, plugging, and valve freezing are eliminated.
Hartman Sleeve Valve: Hartman Sleeve Valves achieve superior control while dissipating pressure energy by accelerating fluid through radial nozzles arranged in a properitary pattern. This advanced design causes the fluid to collide in a turbulent zone along the centerline of the valve surrounded by lower velocity fluid, minimizing erosion and noise.
Series SG Pinch Valve: Reduced Port Air Operated Flanged Pinch ValveSeries SG Reduced Port Valves are designed exclusively for modulating process control applications. By reducing the center section of the valve sleeve, the Cv value of the valve can match the required Cv. Low cost, simple design, Totally enclosed, full-round port sleeve design, Split housing, Flanged connections, Pneumatic or hydraulic operation, No moving parts, Sizes 1" through 24".
Series SGE Pinch Valve: Full Port Air Operated Slip-On Pinch Valve. Low cost, simple design, Totally enclosed, full-round port sleeve design, Split housing, Slip-on connections, Pneumatic or hydraulic operation, No moving parts, Sizes 1/4" through 4"
Series SGD Pinch Valve: Double Wall Operated Flanged Pinch Valve. Cost effective, simple design for highly abrasive applications, Totally enclosed, full port sleeve design, Split housing, no moving parts, Flanged connections (ID of sleeve will be the same as nominal schedule 40 pipe with flanges for the next larger size pipe diameter), Pneumatic or hydraulic operation, Valve sizes 1" through 12" with flange sizes of 1-1/2" through 14".
Series LAF Pinch Valve: Cylinder Operated Flanged Control Pinch Valve. Designed for precise, repeatable process control applications, Pre-pinched, totally enclosed design, Split housing, Flanged connection, Sizes 1" through 24". Features maintenance-free pneumatic actuator.
Model 117 Fixed Cone Valve The Hartman Model 117 Fixed Cone Valve is a free-dischage valve commonly used as a turbine bypass valve, reservoir drain, or continuous discharge flow control valve. The Hartman Fixed Cone Valve operates cavitation and vibration free through its entire operating range, and has excellent flow control even during 10% of stroke.
Advanced V-Control Ball Valve 1/4" - 12": Flow-Tek’s characterized balls provide predictable and accurate control of downstream flow rates. These precision cut balls match the control performance of globe valves while offering the economy, features and reduced size and weight of ball valves. A wide range of V-Port and Slotted Port characterized balls are standard. The Flow-Tek Automator Pneumatic Control Actuator is equipped with advanced pneumatic or electro-pneumatic positioners for precise valve positioning. Flow-Tek Automator electric actuators can be equipped with digital servo boards that respond to an analog command signal or servo boards that are microprocessor controlled that communicate on serial bus networks. In combination with Flow-Tek’s V-control balls, the Automator pneumatic and electric actuators offer superior flow control. Flow-Tek also offers a variety of microprocessor controlled positioners and interfaces that digitally communicate over different serial bus networks. Protocols offered include DevideNet, Foundation Fieldbus, Profibus PA, FoxCom and HART.
Air Operated Pinch Valve Type A: Air Actuated Pinch Valves offer a cost-effective solution to flow control problems. The secret is in the rubber sleeve - the valve's only wetted part. Actuation of the valve, the pinching action, is accomplished by air or hydraulic pressure placed directly on the elastomer sleeve. The valve body acts as a built-in actuator, eliminating costly hydraulic, pneumatic, or electric operators. The sleeve's flexibility allows the valve to close droptight around entrapped solids. In general, 25 psi over line pressure is required for full closure of air actuated pinch valves.
