Tank Valves

Tank Level Sensors: The Red Valve Tank Level Sensor uses a high sensitivity, solid state, pressure transmitter that is completely isolated from the process fluid by an elastomer sleeve that transmits pressure through a fluid fill. It is not effected by foaming, ice and other conditions that can cause errors in Ultrasonic and capacitance Level Sensors.

Tank Level Sensors, Model 40TL, Model 40TL-M and Model 42TL - Data Sheets

Waterflex Tank Inlet Valve: The Waterflex Check Valve is an entirely new valve design from Red Valve, specifically engineered for potable water applications. The all-new Waterflex provides low headloss characteristics and features high backpressure ratings comparable to other valve styles, such as lever-and-weight or spring-loaded disks. The Waterflex operates solely on line pressure and backpressure to open and close - no outside energy source is required. As line pressure builds, the 100 percent elastomeric disc is folded away from the perforated plate, allowing water to pass. The "memory" of the rubber will cause the disc to return flat, and backpressure will seal it against the plate to prevent backflow. The elastomer Waterflex is more cost-effective than other valve styles. Moving parts, such as hinges and springs, can seize if routing maintenance and lubrication are not performed. The Waterflex has no moving parts that require maintenance or repairs, so operational costs are low and service life is long.

Tideflex Tank Outlet Valve: The Curved Bill Tideflex is the latest example of the effort.  The Curved Bill Tideflex uses the same construction for the body of the valve as the traditional Tideflex, but has a bill that is thinner and more resilient.  The bill is formed to a 180-degree curve that returns to the closed position even more naturally than a straight bill.  The curved bill increases the sealing area and allows the valve to form a tighter seal around solids that are typical in storm water, effluent and CSO outfalls.  The Curved Bill is now standard on all Tideflex end-of-pipe products over 18".

Curved Bill Design is Approval for Use on Water Tank Overflow – Texas Commission on Environmental Quality

Flap Gate Valve: This type of valve is designed for service as a check valve on the end of a pipeline. The valves have a cast iron flanged frame, cast iron flap, iron-to-iron, bronze or neoprene seating, and a bronze pivot pin.

Series 37 Assembly - Overflow Pipe Security: With increase concerns over the security of water supply systems, many municipalities have turned to Tideflex Series 37 Inline Check Valves for increase protection of storage tanks. The Series 37 is installed within the overflow pipe, 5 feet or more above the end of the pipe, completely hidden from view. The only part of the valve that is exposed is the rubber flange. The OD of the flange can even be painted to match the color of the piping.

Tideflex Mixing System - Full Brochure (Large File - May Take a Few Minutes to Download)

Series OSV Water Tank Security: Amidst increased concerns over water supply systems, many municipalities have turned to Series OSV for increased protection of water storage tanks. The Tideflex valve provides protection against tampering, infiltration by birds and insects and will not allow cold drafts to form in the overflow pipe, helping to minimize icing in the tank.

Tideflex Mixing System - Full Brochure (Large File - May Take a Few Minutes to Download)